PUBLICATIONS
AND JOURNAL ARTICLES FROM 1968 TO 2005
1. C. BATHIAS et E. RIDEAU :
« Une Méthode d'Attaque Electrolytique du Fer et des Aciers à Bas Carbone pour
la Mise en Evidence de Certaines Caractéristiques Structurales » - C.R. Acad.
Sc., Paris, P. 1203, 1205, 17 Avril 1968
2. C. BATHIAS : «
Observations d'une Sous-Structure Cellulaire le Long de la Cassure par Fatigue
d'un Spécimen en Acier Doux » - C.R. Acad. Sc., Paris, P. 1737, 24 Juin 1968
3. C. BATHIAS et H. DE
LEIRIS : « Technique de Préparation des Cassures par Fatigue en Vue de leur
Examen par Microscopie Electronique Directe dans le Cas de Spécimens en Acier
au Carbone - Met. Corr. Ind., Mars 1970, p. 83-91
4. C. BATHIAS : «
Contribution à l'Etude des Couches Sous-Jacentes des Cassures par Fatigue dans
les Aciers au Carbone » - Mem. Sc. Rev.
Metal., Mars 1970, pp. 165-171
5. C. BATHIAS : «
Contribution à l'Etude Métallographique du Stade III de la Fissuration par
Fatigue dans les Aciers au Carbone » - Mem. de l'Art.
Franç, 1er fascicule 1970, p. 64-113
6. C. BATHIAS et J. CHERET :
« Sur le Mécanisme de Maclage de Fer Déformé par une Onde de Choc » - Mem. de l'Art.
Franç.,2ème fascicule 1970, p. 363-374
7. C. BATHIAS : « Comparaison des
Déformations Plastiques à Fond de Fissure de Fatigue dans un Acier Extra-Doux
et un Acier Austénitique » - C.R. Acad. Sc., Paris, t. 271, p. 682-685, 5 Oct.
7O
8. C. BATHIAS : « Etude
Comparée des Déformations Plastiques se Produisant en Tête des Fissures par
Fatigue dans les Aciers au Carbone et dans les Aciers Austénitiques » - Mem.
Sc. Rev. Met., n° 4, 1971, p. 233-245
9. C. BATHIAS, J. DE FOUQUET
et H. DE LEIRIS : « Sur la Relation entre l'Ecartement à Fond de Fissure et la
Vitesse de Propagation d'une Fissure par Fatigue » - C.R. Acad. Sc. T. 274, 6
Mars 1972, p. 867-870
10. C. BATHIAS et R.M. PELLOUX : «
Electropolishing System Ideal for Small Areas of Large Structures” - Metal
Progress, Vol. 102, n° 2 1972, p. 69
11. C. BATHIAS et R.M.
PELLOUX
Etude de la zone plastifiée
à fond de fissure : application à la propagation des fissures de fatigue dans
les aciers maraging et les aciers
austénitiques
15ème colloque de
Métallurgie, Saclay, Juin 1972
12. C. BATHIAS : « La Fissuration
par Fatigue » - Revue Pratique de contrôle Industriel, n° 60, Avril 1973, P.
77-84
13. G. SERTOUR, C. BATHIAS,
A. BOUGEOIS et J.M. GREGOIRE
« Influence de la
Précipitations sur les Caractéristiques Mécaniques des Alliages d'Aluminium et
des Alliages de Titane » - 16ème Colloque de Métallurgie de Saclay, Juin 1973
14. C. BATHIAS et R.M.
PELLOUX : “Fatigue Crack Propagation in Martensitic and Austenitic Steels” -
Metal. Transaction, Vol. 4, n° 5, Mai 1973, P. 1265-1274
15. C. BATHIAS : « Influence
de la Microstructure sur la Fissuration par Fatigue » - Agard Report n° 610,
1973
16. H. DE LEIRIS, C. BATHIAS
: « La Propagation des Fissures de Fatigue - Connaissances Actuelles et
Récentes Applications » - Rev. M., Vol. 20, n° 1, 1974
17. C. BATHIAS : «
L'Initiation des Fissures de Fatigue » - 17ème colloque de Métallurgie, Saclay,
Juin 1974
18. C. BATHIAS : « Etude des
Mécanismes de la Fissuration par Fatigue des Aciers Ferritiques et des Aciers
Austénitiques » - Sciences et Techniques de l'Armement, 48, 2ème Fasc., 1974
19. G. SERTOUR, M. GATEAU,
J. ODORICO, C. BATHIAS, M. VANCON : « Les Méthodes Modernes d'Evaluation de la
Résistance à la Fatigue » - Revue Matériaux et Techniques, n° 5, Mai 1975, p.
3-6
20. C. BATHIAS : « Influence
du Rapport entre la Contrainte Minimale et la Contrainte Maximale sur la
Fissuration par Fatigue des Alliages Légers » - Revue de Métallurgie, Juillet
1976
21. C. BATHIAS, M. GATEAU,
J. PHILIPPE, G. SERTOUR : « Etude de la Rupture de Plaques Minces en Alliages
Légers Utilisés dans le Domaine Aéronautique » - Rev. de
Métallurgie, Juillet, Août 1975, p. 573-6OO
22. C. BATHIAS : «
Différents Points de Vue sur la Fatigue Oligocyclique » - Mécanique, Matériaux,
Electricité, Nov., Déc. 1976, n° 323, p. 3
23. M. VANCON, C. BATHIAS :
« Influence des Surcharges sur la Vitesse de Fissuration par Fatigue dans les
Alliages d'Aluminium » - Mem. Sc. Rev., Sept. 77, p. 547-559
24. C. BATHIAS, M. GUERLET,
J. COUPRY, D. FERTON : « Etude des Méthodes mis en Oeuvre pour la Détermination
et le Contrôle de la Ténacité des Alliages d'Aluminium » - Mec. Mat. Elect., n°
328, Avr. 1977, p. 14 et Mem. Sc. Rev.
Met., Avr. 1977, p. 243
25. C. BATHIAS, M. VANCON :
« Mécanismes de l'Influence des Surcharges sur la Propagation des Fissures de
Fatigue dans les Alliages d'Aluminium » - Mec. Mat. Elect., n° 328, Avr. 1977, p.
12 et Mem. Sc., Rev., Sept. 1977, p. 547
26. J.P. BAILON, J. MASOUNAVE, C. BATHIAS: “On the Relationship Between the Parameters of Paris'law for Fatigue Crack Growth
in Aluminium Alloys” - Scripa Met., Vol. 11, 1977, p. 1101-1106
27. Ph. TAUPIN, C. BATHIAS,
A. PELLISSIER TANON : « Endommagement de l'Acier Austénitique Z6 CND 17-12
Soumis à des Séquences de Déformation Plastique d'Amplitude Variable » - Mem.
Sc. Rev.
Met., Juil. 1978, p. 432-441
28. C. BATHIAS- “Application of Fracture Mechanics to
Aluminium Alloy Selection” -
29. C. BATHIAS, M. VANCON : « Mechanisms of
Overload Effect on Fatigue Crack Propagation in Aluminium Alloys” -
30. C. BATHIAS, A. CLERIVET: “Study of Crack Tip Opening under Cycling
Loading Taking into Account the Environment and R Ratio” - Eng. Fract. Mech., 1979, Vol. 12, n° 4, p. 599-611
31. A. CLERIVET, C. BATHIAS:
“Etude de l'Ouverture du Fond de Fissure sous Sollicitation Cyclique en Fonction
de l'Environnement et du Rapport R » - Revue de Métallurgie, Vol. 4, n° 1,
1980, p. 103-107
32. C. BATHIAS et al : « Influence of Various
Parameters on the Determination of the Fatigue Crack Arrest Threshold” - Fat.
33. C. BATHIAS et al : « Fatigue Crack Growth
Measurement Data Analysis” - ASTM.STP 738, July 1981, p. 29-44
34. C. BATHIAS, R. ESNAULT, J. PELLAS: “Application of Fracture
Mechanics to Graphite Fibre Reinforced Composites” - Composites, July 1981, p.
195-200
35. K. SAANOUNI, C. BATHIAS: “Study of Fatigue Crack Initiation in the
Vicinity of Notches” -
36. A. LAKSIMI, C. BATHIAS,
R. ESNAULT, D. ALIAGA: « Etude du Seuil de Délaminage dans un Matériau
Composite Renforcé par Fibres de Verre » - J.N.C. 3, 1982, p. 171-182, Pluralis
37. R. ESNAULT, D. ALIAGA,
C. BATHIAS: “Endommagement et Rupture par Traction et Fatigue de Deux Matériaux
Composites Entaillés à Fibres de Verre et de Carbone » - J.N.C. 3, 1982,p 183 -194, Pluralis
38. C. BATHIAS : « Rupture
des Composites Quasi-Isotropes à Fibres de Carbone » - Enjeux n° spécial sur
les composites, Sept. 1982
39. C. BATHIAS, M. GABRA, D. ALIAGA : « Low
Cycle Fatigue Damage Accumulation of Aluminium Alloy » - ASTM.STP77, 1983, p.
23-44
40. C. LOYE, C. BATHIAS, D. RETALI, J.C. DEVAUX : « The Plastic Zone
Ahead of a Fatigue Crack in 316 Stainless Steel - ASTM.STP 811, p. 427-444,
1983
41. M. VANCON, J. ODORICO,
C. BATHIAS: “Etude Fractographique du Délaminage des Composites à Fibres de
Carbone –Epoxy » - JNC4 p 93-120, Pluralis ,1984.
42. M. GABRA and C. BATHIAS: “Fatigue Crack Initiation in Aluminium
Alloys Under Programmed Block Loading” - Fat.
43. M. GABRA and C. BATHIAS: “Interpretation of Fatigue Crack Growth in
aAluminium Alloys under Programmed Block Loading” - Fat.
44. C. BATHIAS and A. LAKSIMI: “Delamination Threshold and Loading
Effect in Fiber Glass Epoxy Composite” - ASTM.STP 876, p. 217-237, 1985
45. C. BATHIAS : «
Desenvolvimento Las Necessidades de Pesquisas non Campo dos Materiales” -
Tecnometal, p. 23-25, n° 3, Janv. 1985
46. C. CAMPELLO, C. BATHIAS
: « Etude des Plaques Stratifées Contenant un Trou Circulaire sous Chargement Quasi Statique.
JNC5 p149-162, Pluralis 1985
47. G. INIZAN, L. ANQUEZ, C.
BATHIAS: “Etude de l'Endommagement d'une Plaque composite Trouée Sous
Sollicitations Biaxiales Monotones ou Cycliques » - JNC5 p163_178 Pluralis 1985
48. D. LAI, C. BATHIAS : «
Comportement à l'Endommagement autour d'un Trou d'un Matériau Composite
Carbone-Epoxy » - JNC5 p179-190 Pluralis
1985
49. A. LAKSIMI, M.
CHERFAOUI, C.BATHIAS : « Emission Acoustique de l'Amorçage et de la Propagation
d'un Délaminage dans un Composite
Verre-Epoxy » - JNC 5 p625-638
Pluralis 1985
50. K. SAANOUNI, J.L. CHABOCHE, C. BATHIAS : «
On the Creep Crack Growth Prediction by a
Local Approach” -
51. C. LESPINASSE et C. BATHIAS : “Fatigue
Crach Growth of the 8090 Alloy Under Overloading” - Journal de Physique N° 9,
48, P 793-799, Sept. 87
52. Z. MILOSEVIC, C. BATHIAS, A. PELLISIER-TANON :“Ductile
Crack Growth of Surface Cracks in Thin Welded Joints of an Aluminium Alloy 7020
T6” -
53. C. BATHIAS : «
Endommagement des Matériaux Composites : Mécanismes et Mise en Evidence » -
Matériaux et Techniques, Avril-Mai 1988, p. 7 à 16
54. C. BATHIAS
-“The Fatigue of High Performance Composite Materials”
-“The Damaging of Composite Materials: Mechanisms and Detection”
Edited in " Advances in fatigue science
and technology " 1989 Kluwer Academic Publishers
pp 627_676.
55. O. ONI , C BATHIAS : « A Comparison of Near
Threshold Fatigue Crack Propagation in High Strength Steels” - Fatig. Fract.
56. S.D. ANTOLOVITCH, A.M. GOKHALE, C. BATHIAS: “Application of
Quantitative Fractography and Computed Fractography to Fracture Processes in
Materials” - ASTM STP 1085 - 1990 - PP3-25
57.. T.P. SOEMARDI, D. LAI, C. BATHIAS : «
Static and Fatigue Biaxial Testing of Fiber Composites Using thin Walled
Tubular Specimens” - Edited in "Inlastic deformation of composite
materials" by G.J. DVORAK-Springer Verlag
1991
58. KONG Xiangan, K. SAANOUNI, C. BATHIAS : “On
the Fatigue at Very High Frequency - Theorical and Variation of Formulation”
- Journal of Engineering Materials and
Technology. Avril 1991 Vol113 / pp205-209
59. G. THANIGAIYARASU, KONG, K. SAANOUNI, C. BATHIAS :
“On the Fatigue at Very High Frequency - Application to some materials” -
Journal of Engineering Materials and Technology. Avril 1991 Vol 113 / pp210-214
60. D. LAI and C. BATHIAS : “Hole Effect and
Compression Fatigue of T300/N5208 Composite Materials” - ASTM STP 1110, 1991 -
pp 638-658
61. C. BATHIAS: “Fracture and Fatigue of High Performance Composite Materials : Mechanisms and Prediction” -
62. XC LIU and Claude BATHIAS: "Fatigue Behaviour of Al2O3 Short
Fibres Reinforced Aluminium Alloy, Fatigue and Fracture of Engineering
Materials & Structure"- Vol 15,N° 11,1992,pp
1113-1123.
63. Jiayu XIAO, Dawei LAI and Claude BATHIAS:"Modified Tan's Models
for the Strengh Prediction of Woven Laminates with Circular Holes" - Vol
3, N°10 pp 961-973- 1993
64. XC LIU and Claude BATHIAS:
"Defects in Squeeze-Casting Alumina/Al alloy Composites and their Effects
on Mechanical Properies"- Composite science and technology - Vol 46, pp
245-252, 1993.
65. XC LIU and Claude BATHIAS:
"Fatigue Damage Development in Al2O3/Al Composites"- Composites - Vol
24, N° 3, 1993, pp 282-287.
66. XC LIU and Claude BATHIAS:" Fatigue Behaviour of Al2O3 Short
Fibres Reinforced Aluminium Alloy" - Fatigue fracture of engineering
materials & structure" - Vol 15, N° 11, 1993, pp 1113-1123.
67. C. BATHIAS and J. NI:
"Determination of Fatigue Limit Between 105 and 109 Cycles on Ultrasonic
Fatigue Device"- ASTM STP 1211,1993, pp 141-152.
68. C. OMAM-NONGA, J. LU,
H.P. LIEURADE, J.F. FLAVENOT, C. BATHIAS: "Grenaillage de Précontrainte -
Etude Paramétrique dans le cas de Composites à Matrice Métallique - Al-SiCw.
69. J.XIAO and C.BATHIAS - "Fatigue Damage Mechanisms and Strength
of Woven Laminates"- Journal de physique, nov.1993 - Vol 3, pp 1651-1656.
70. J. Ni and C. BATHIAS:" Development of an Ultrasonic Fatigue
Device and its Application in Fatigue Behaviour Studies" - Balkema,
71. Jiayu XIAO and Claude BATHIAS: "Fatigue Behaviour for Unnotched
and Notched Woven Glass/Epoxy Laminates" - Composites Science and
Technology -50,1994, pp 141-148.
72. Jiayu XIAO and Claude BATHIAS:" Strength Prediction and Damage
Mechanisms of Notched Glass/Epoxy Woven Laminates with Circular Holes" -
accepted by Fatigue and Fracture of Engineering Materials & Structure VOL.
17 N° 14,1994, pp 41-428.
73. C. BATHIAS and T. WU: "Application of Fracture Mechanics
Concepts in Ultrasonics Fatigue" - Engineering Fracture Mechanics - Vol
47, N°5, pp 683-690,1994.
74. C. BATHIAS and J. XIAO: "Fatigue Damage and Fracture Mechanisms
of notched Woven Laminates" - Journal of Composite Materials - Vol 28, N°
12, 1994.
75. C. BATHIAS and J. XIAO: "Fatigue Behaviour of unnotched and
Notched Woven Glass/Epoxy Laminates" - Composites Science and Technology -
Vol 50, pp 141-148, 1994.
76. C. BATHIAS and X. LIU: "Creep Features of Al2O3-Al Alloy
Composites" - Journal of Materials Science - Vol 29, pp 4618-4624, 1994.
77. C. BATHIAS and J. XIAO: "Damage and Fracture Of
Notched Non-Woven and Woven Composite Laminates" - Composite Science and
Technology - Vol 52, pp 99-108, 1994.
78. T.WU, J.NI and C.BATHIAS:
"An Automatic Ultrasonic Fatigue Testing System for Studying Low Crack
Growth at Room and High Temperatures" - ASTM STP 1231, dec.1994, pp
598-607.
79. J.XIAO and C.BATHIAS - "Fatigue damage mechanisms and strength
of woven laminates"- Journal de physique, nov.1993 - Vol 3, pp 1651-1656.
80. T.WU and C.BATHIAS: "Application of Fracture Mechanics Concepts
in Ultrasonic Fatigue" -
81. C.BATHIAS - "La
Rupture des Matériaux Composites à Haute Performance" - La revue de
métallurgie - Février 1995.
82. C. BATHIAS : « A review of Fatigue of
Aluminium Matrix Reinforced by Particles on Sheets Fibers” – Mat. Sc. Forum
Vol.217, 1996, pp 1407-1412
83. C.BATHIAS and al - "Accelerated Vibratory Fatigue Test by
Ultrasonic Frequency at Cryogenic Temperature" - Eng. Fracture Mech - Vol 54, 1996.
84. HG.TAO and C.BATHIAS -
"Etude Expérimentale du Fretting Fatigue à Très Haute Fréquence" - La
Revue de Métallurgie, pp. 687 à 695, Mai 1996
85.C. BATHIAS _ "Notch Effect on Fatigue
of High Performance Composite Materials Mechanisms
and Prediction". Key
86. C. BATHIAS – "Retrospective View on the Role of the Plastic
Zone at a Crack Tip". FFEMS _ Vol 19. N° 11
(1996) pp 1301-1306.
87. C. BATHIAS, K. LE GORJU, C. LU, L. MENABEUF – "Fatigue Crack
Growth Damage in Elastomeric Materials. ASTM STP 1296 – (1997) pp 505-513
88. M. GONZALEZ, C. BATHIAS and G. DOMINGUEZ : "Study of Particles
Distribution in Composite Materials using X-Ray Computer Tomography – Vol.7 N°
2 December 1998 pp 12-18
89. C. BATHIAS : "There is no Infinite
Life in Metallic Materials – FFEMS – 22 – 1999 pp 559-565
90. Q. WANG, J.Y. BERARD, A. DUBARRE, G. BAUDRY, C. BATHIAS
: "Gigacycle Fatigue of Ferrous Alloys" – FFEMS 22 –1999 pp
667-672
91. Q. WANG, J.Y BERARD, C. BATHIAS :
"High cycle Fatigue Crack Initiation and Propagation behaviour of HS
Spring Steels" – FFEMS 22 1999 – pp 673-677
92. Q. WANG, C. BATHIAS,
93.M. GONZALEZ, G. DOMINGUEZ, C. BATHIAS :
"Some Results from X Ray Computed Tomography applied to MMC – Journal of
Composites Technology and Research, Janv. 2000 pp 45-48
94. G. DOMINGUEZ, M. GONZALEZ, C. BATHIAS : “
Metodo no destructivo para el estudio de materiales “ - Tomografia
Computarizada – Ciencia y Desarrollo. Feb. 2000, pp 70 – 75.
95. C. BATHIAS: “Relation Between Endurance
Limits and Thresholds in the Field of Gigacycle Fatigue” – ASTM-STP 1372, 2000,
pp 135-154
96. C. BATHIAS, G. BAUDRY :
« Application de la Résistance à la Fatigue Gigacyclique au Calcul de Structure
» - Bulletin SFM, 2000/1, pp 13-18
97. ZD SUN, C. BATHIAS, G. BAUDRY: “Fretting Fatigue of 42 CiMo 4 Steel
at Ultrasonic Frequency” – International Journal of Fatigue 23, 2001, pp
449-453
98. C. DROUILLAC, C. BATHIAS , P. Le FRANCOIS:
“How and Why the Fatigue SN Curve does not Approach an Horizontal Asymptote” –
International Journal of Fatigue 23, 2001, pp 143-151
99. Q. SHI, C. BATHIAS, S.
ANTOLOVICH, D. POOLER: “Etude de la Fatigue et de l’ Endommagement des Matériaux
Composites en Bois par Tomographie de Rayons X » - Revue des composites et des
matériaux avancés, Vol.11, n°3-2001, Hermès, pp 225-231
100. K. LE GORJU-JAGO, C.
BATHIAS : « Fatigue Initiation and Propagation in Natural and Synthetic Rubbers
» - International Journal of Fatigue 24, 2002, pp 85-92
101. Q.Y WANG, C. BATHIAS, N.KAWAGOISHI, Q. CHEX: “Effect of Inclusion a
Subsurface Crack Initiation and Gigacycle Fatigue Strength”- International
Journal of Fatigue, Vol. 24, Dec. 2002, pp 1269-1274
102. C. BATHIAS, JM de
MONICAULT, G. BAUDRY: “Automated Piezoelectric Fatigue Machine for Several
Environnements” – ASTM STP 1411, 2002, pp 3-15
103.
104.
105. Q. SHI, C. BATHIAS, A.
TORRES MARQUES: “Etude tomographique d’une plaque en Kevlar après impact” –
Revue des composites et des matériaux avancés, Vol. 14 n°2, 2004, pp 215-227
106. I. MARINES, G.
DOMINGUEZ, C. BATHIAS : « Curvas S-N de aceros de alta resistencia dentro del
regimen gigaciclico » - Cientifica ESIME, Vol. N°2, pp 55-62.
107. E. BAYRAKTAR, F. MONTEMBAULT & C. BATHIAS: “Multiscale
observation of polymer materials in order to explain mechanical behaviour and
damage mechanism by X-ray computer tomography” – Journal of Materials Science
& Technology, Vol. 20 (1), pp 27/31, 2004
108. E. BAYRAKTAR, C. BATHIAS, H. XUE, H. TAO: “On the gigacycle fatigue
behaviour of Ti-Al alloy” – International Journal of Fatigue, Vol. 26(2), 2004,
pp 1263-1275