PHD RESEARCH SUPERVISED by C.
BATHIAS from 1976 to 2004
28/04/76 – VANCON M. –
Study of fatigue crack growth.
Engineer –EADS Research Center – Suresnes
20/10/76 – HADIDA A. &
SAMA ITOUA L. – Mechanisms of fatigue-corrosion cracking in salt water of austenitic
stainless steel Z6 CND 17-12.
19/04/79 – FONT FILAX A. –
Mechanisms of fatigue cracking related to strain hardening.
Professor at the University of Santiago (Chili)
09/01/81 – BERTEL J.D –
Effect of the stress field on the fatigue crack growth with overloading.
Application to aluminium alloys.
Engineer– Mavilor – 42152 L’
Horme
15/03/81 – HOUSSNY M.- Acoustic emission related to cyclic plasticity of metals
and the environment effect. Application to aluminium alloys 2618AT651 et 2024T351.
06/06/78 – PEUTAT M. –
Application of fracture mechanics to the prediction of pressure vessel fatigue
life and failure.
Engineer- EADS – Dépt
Qualité- Les Mureaux
29/10/82 – GABRA M. –
Contribution to modelling damage of aluminium alloys under block-loading
Professor at the University of Cairo (Egyptia)
18/02/83 – LAKSIMI A. –
Fatigue behaviour of composite materials .
Professor at UTC – Compiègne
09/10/84 – MILOSEVIC Z. –
Ductile fracture from part through crack
Engineer at Renault – Rueil Malmaison
25/01/85 – DAVY A. –
Modelling of fatigue cracking under variable loading. Application
at civil aircraft spectrum.
Engineer at
Airbus – Toulouse
25/01/85
– BOUKSIM L. – Fatigue crack initiation under spectrum loading in unnotched and
notched aluminium specimens.
27/08/85 – GALLIOT A. –
Validation of a new approach for designing aircraft components in fatigue.
Engineer at Airbus- Toulouse
03/01/86 – CLERIVET A. –
Contribution to model the fatigue crack opening under cyclic loading in
aluminium alloys
Associated professor at IUT – St Nazaire
17/01/86 – ONI O. –
Contribution to study short crack fatigue growth in steels.
Professor at the University of Lagos – Nigeria
16/05/86 – BONNAFE J.P
–Application of X-ray diffraction and acoustic emission to study fatigue damage
of aluminium alloys after shotpeening.
Engineer at EADS – Les Mureaux
25/09/86 – SCHUSTER I. – Characterization
of fatigue-corrosion phenomenon of zircaloy in iodide environment
Engineer at CEA - CENG – Grenoble
26/09/86 – LAMBERT Y. –
Study of damage at the fatigue crack tip in large plasticity
Engineer at PSA
15/03/87 – ISSAM J. –
Elliptical short cracks.
Engineer– Irak
27/03/87 – INIZAN G. –
Modeling of biaxial fatigue of notched composite material laminate.
Engineer – Snecma – Villaroche
25/06/87 – LACOMBE G. –
Prevision of cold forging of low carbon steel from tensile and compression
tests.
16/07/87 – ANDO K. – Modelling
of damage in composite materials and optimisation of structures
Engineer at Penta-Ocean – Tokyo (Japan)
06/10/87 – FALBRIAC-FESNEAU
P. – Propagation of creep crack in a stainless steel welded joint.
17/12/87
– KONG X. – Theoretical approach and numerical simulation of vibratory fatigue. Application at Udimet 500.
Professor – Southwest Jiatong University – (China)
08/03/88 – POTET P.
–Application of the
vibrothermography to the detection of damage in composite
materials
President of CEDIP
Company– 77 Milly la Forêt
11/03/88 – EL GHALI C. – Contribution at the modelling of the
viscoplastic behaviour under monotonic
and cycle loading of Udimet after aging
at 500 and 700°C.
25/05/88 – BARTHELEMY F. –
Initiation of crack in fretting-fatigue inside holes
Engineer - STCAN – Paris
17/06/88 – THANI-GAIYARASU
G. – Contribution at the modelling of endurance and crack propagation under
ultrasonic fatigue.
17/10/88 – BATISSE R. –
Contribution to modelling ductile fracture of steels.
Engineer at GDF Saint Denis
21/10/88
– SAANOUNI K. – On the analysis of the visco-elastic solids with the damage
mechanics theory.
Professor – UTT – Troyes
05/12/88 – LAI D. –
Contribution to the modelling of composite laminate fracture under monotonic
and cyclic loading with compression effect.
Associate Professeur – UTC,
Compiègne
05/01/90
– LIU Z. – Evaluation of X ray tomography to study composite material damage.
13/12/90 – SOEMARDI TP. –
Study of mechanical behaviour and damage of glass-epoxy tubes under biaxial
monotonic and cyclic loading.
Professor at Faculty of Engineering University of Indonesia
Jakarta-Selatan/Indonésia
22/01/90 – AOUALI H. –
Study of cyclic hardening and fatigue of aluminium-lithium 8090.
Professor, Morocco.
2/02/90 – JEGGY –
Modelling of failure of CFRP notched plates under biaxial quasi-static loading.
Engineer at CETIM – Saint - Etienne
20/11/90 – C. GOUNET-LESPINASSE
– Contribution at the study of fatigue crack propagation in aluminium-lithium
8090.
Engineer at Renault –
Direction de la recherche. - Guillancourt
12/04/91 – C. LU – Study
of the mechanical behaviour and fatigue damage of elastomers
Technical director of
Whirpool Shanghaï (China)
18/11/91 – NI. J. –Study
of mechanical behaviour and damage mechanisms in ultrasonic fatigue
Deputy Director Snecma – Asia- Beijing (China)
14/01/92 – XIAO Jiayu –
Prediction of residual strength under monotonic and cyclic loading in notched
laminated woven plates
Vice-Président University of Changsha (China)
26/02/92 – XIE Jilong –
Study of fatigue and fracture of adhesive joints between GFRP and elastomeric
materials
Professor at Jiatong University- Beijing (China)
23/06/92
– FOSSO Philippe – In-situ observation of damage in polymer matrix composite
under tensile test and X-ray tomography.
Consultant – Los Angeles
28/09/92 – WU Tieying –
Modelling of
ultrasonic fatigue crack growth at high temperature. Application
to nickel base alloys.
Professor – University of Nanjing (China)
28/09/93 – LIU Xie Cong –
Microstructure, properties and damage of metal matrix composites :
A1203, AS7G06 et A1203/AS5U3G1.
Professor at the University
of Changsha
(China).
05/01/94 – OMAM NONGA –
Effect of residual stress and surface roughness on the fatigue resistance of
metal matrix composite materials.
25/10/94 – EL ALAMI
IDRISSI Kacem – Study of behaviour and damage of jet turbine alloys in
ultrasonic fatigue.
Professor, Morocco.
28/09/95 – BOUZA Amirouche
–Study of some important factors for the mechanical properties of metal matrix
composites.
Professor High school of Clichy.
12/02/96 – JAGO Gilles –
Relation between microstructure and damage mechanisms in forged titanium alloys.
Application at ultrasonic fatigue.
Engineer at Hutchinson – Chalette sur
Loing.
18/10/96 – TAO Hua – Study
of very high cycle fatigue at cryogenic temperature.
Professor at North-western Polytechnical University of Xian.(China)
08/12/97 – BONIS Julien – Gigacycle fatigue of
nickel base alloys at high temperature
Research engineer
CNRS/ Orsay.
05/02/98 – LE GORJU Karine
– Effect of stress induced crystallization on initiation and propagation of
fatigue cracks in elastomers.
Engineers at Hutchinson
– Chalette sur Loing.
08/10/98 – XING Bin –
Statistical aspect of fatigue in aluminium alloys
17/12/98
– WANG Qingyuan – Very high cycle fatigue of steels and cast iron.
Professeur à l’université de
Chengdu (China)
20/12/99 – YUSE Kaori
–Application of electrical resistance measurement at the non destructive
testing of CFRP.
Research Engineer at
MITI/ Tsukuba(Japan)
06/01/00 – SUN Zhende
–Study of fatigue threshold at ultrasonic frequency.
Engineer at Axson/Shanghaï (China)
06/03/00 – FAGUNDES
Patricia – Modelling of the bi-metal plasticity
Engineer at Airbus Toulouse.
27/04/01 – SAILLY
Stéphanie –Modelling of elastomeric material creep.
Consultant-engineer at Atran
28/05/01 – GONZALEZ GARCIA
Mario – Application of a medical scanner at the observation of damage in
aluminium and aluminium matrix composites.
Engineer at
Imec – Louvain (Belgium)
20/12/02 – FOUTEL Anne –
Mono layer carbon
nanotubes.
Post-doc at the university of Brest
14/11/2003 – SHI Qihan-
Multiscale study of
composite materials using X ray tomography.
Engineer at
Bosch Rexroth DSI SAS. Lyon
05/10/2004 – MARINES Israel – Exploration of
the metal fatigue beyond the billion of cycles.
Post-doc to the Washington University at St Louis (USA)