PAPERS , INVITED PAPERS , KEYNOTE LECTURES, FROM 1969 TO 2005

 

 

1. C. BATHIAS

Contribution à l'étude des sous-couches sous-jacentes des cassures par fatigue dans les aciers au carbone

Com. aux Journées Métallurgiques d'Automne 1969

 

2. C. BATHIAS

Etude comparée des déformations plastiques se produisant en tête de fissures par fatigue dans les aciers au carbone et dans les aciers austénitiques

Com. aux Journées Métallurgiques d'Automne 1970

 

3. C. BATHIAS, R.M. PELLOUX

Etude de la zone plastifiée à fond de fissure : application à la propagation de fissures de fatigue dans les aciers maraging et dans les aciers austénitiques

Com. au 15ème colloque de Métallurgie de Saclay, Juin 1972

 

4. R.M. PELLOUX, C. BATHIAS, L. VAN SWAM

Fatigue crack propagation in martensitic and austenitic steels

Com. au IV Congrès International sur la rupture. Munich, Mars 1973

 

5. C. BATHIAS

La zone plastifiée à fond de fissure de fatigue

Congrès Français de Mécanique Poitiers, Sept. 1973

 

6. C. BATHIAS

Effect of microstructure on fatigue crack growth

37th Agard Meeting of the Structures and Materials panel. La Haye, 10 Oct. 1973

 

7. C. BATHIAS

L'initiation des fissures de fatigue

Com. au 17ème Colloque de Métallurgie de Saclay, Juin 1974

 

8. C. BATHIAS, M. GATEAU, J. PHILIPPE et G. SERTOUR

Etude de la rupture de plaques minces en alliages légers utilisées dans le domaine aéronautique

Com. aux Journées Métallurgiques d'Automne, 1974

 

9. C. BATHIAS

Déformation plastique à fond de fissure de fatigue

Réunion du Groupe Monetier "Plasticité", 12 Mars 1975

 

10. C. BATHIAS

Microscopic aspect of fatigue crack growth

Advanced Seminar of Fracture Mechanics, 20 Oct. 1975, Ispra

 

11. C. BATHIAS, M. VANCON, G. SERTOUR

Effects of overload on fatigue crack growth in some aluminium alloys

International Conference of Mechanical Behavior of Materials 16-20 1976. Boston

 

12. C. BATHIAS, J.L. BERNARD

Ecrouissage cyclique et fatigue oligocyclique des alliages d'aluminium en fonction du traitement thermique

ICSMA 4, Nancy 30 Août 1976

 

13. C. BATHIAS, B. BRINTET, G. SERTOUR

L'amorçage des fissures de fatigue peut-il être mis en évidence grâce à l'émission acoustique ?

Eight World Conference on Non Destructif Testing, Cannes, 6 Sept. 1976

 

14. C. BATHIAS

Selection of Aircraft Structural Materials using Fracture Mechanics

Agard Meeting Fracture Mechanics Design Methodology, Londres 28-29 Sept. 1976

 

15. A. HADIDA, SAMA ITOUA, D. FRANCOIS, C. BATHIAS, P. RABBE, P. PETREQUIN

Mécanismes de fissuration par fatigue de l'acier Z3 CND 17-12 en fonction da l'environnement

Journées Métallurgiques d'Automne, Paris 1976

 

16. J.L. BERNARD et C. BATHIAS

Fatigue oligocyclique des alliages d'aluminium

Journées Métallurgiques d'Automne, Paris 1976

 

17. J. FERTON, M. COUPRY, M. GUERLET, C. BATHIAS

Etude critique de la méthode d'essai pour déterminer KIC dans les alliages d'aluminium

Journées Métallurgiques d'Automne, Paris 1976

 

18. C. BATHIAS

Corrosion - Fatigue of aluminium alloys

44th Panel Agard Meeting, Lisbonne 17-22 Avril 1977

 

19. C. BATHIAS

Plastic zone deformation and fatigue crack growth

ICF 4. Waterloo. 23 Juin 1977, P. 1307

 

20. C. BATHIAS, G. PLUVINAGE, A. PINEAU, P. RABSE

Study of Iow fatigue crack growth rates in 316 stainless steel and RR 58 al alloy

ICF 4, Waterloo, 22 Juin 1977, P. 1283

 

21. C. BATHIAS

Prévision de la tenue à la fatigue en service des structures aéronautiques en alliages d'aluminium

Journées Métallurgiques d'Automne, Paris 1977

 

22. C. BATHIAS, J.P. BENTEJAC, J. PELLAS

Application de la mécanique de la rupture aux joints collés et aux composites à fibres de carbone

Congrès Français de Mécanique, 1977, Grenoble

 

23.C. BATHIAS

Mécanique et mécanismes de la fissuration par fatigue

Ecole d'Eté Franco-Québécoise (EFQF). Juillet 1978, Sherbrooke

 

24. C. AMZALLAG, C. BATHIAS, G. BAUDRY, L. MENY, J. PETIT, A. PINEAU. C. ROBIN, M. TRUCHON

Near threshold fatigue crack growth mechanisms in a 2618 A alloy and a 316 stainless steel Engineering

Fondation Conference, January 6-11, 1980, Asilomar, Californie

 

25. C. BATHIAS

Résistance à la rupture - Courbe R

Ecole d'été sur la Rupture, le Contrôle et la Sûreté, Montréal, Juillet 1980

 

26. B. LAWLESS, S.D. ANTOLOVICH. C. BATHIAS, B. BOURSIER

The effect of microstructure on the FCF and overload behavior of Waspalloy at room temperature

Ecole d'été sur la Rupture, le Contrôle et la Sûreté, Montréal, Juillet 1980

 

27. C. BATHIAS

Les matériaux et l'innovation technologique

Conférence invitée à l'Université de Lisbonne, Mai 1980

 

28. C. BATHIAS, C. LOVE, J.C. DE VAUX, D. RETALI

Plastic zone at the tip of fatigue crack in 316 stainless steel

Hauptversammlung, Deutsche Gesellschaft für Metallkunde, 9-12 Juin 1981, Baden-Baden

 

29. J.D. BERTEL, A. CLERIVET, C. BATHIAS

On the relation between the threshold and the effective stress intensity factor range during complex cyclic loading

14th Nat. Symposium on Fracture, Los Angeles, June 2, 1981, ASTP STP 791

 

30. M. GABRA, C. BATHIAS, D. ALIAGA

Fatigue damage accumulation in aluminium alloys

Euromech. 22-25 Septembre 1981, Cachan

 

31. C. BATHIAS

The use of experimental techniques for description of fatigue damage

Advanced Seminar on Fracture Mechanics, Oct. 1981, lspra

 

32. J.D. BERTEL, A. CLERIVET, C. BATHIAS

Overload influence of the fatigue threshold of high strength aluminium alloys

International Symposium on Fatigue Threshold, June 1981, Stockholm

 

33. C. BATHIAS

Damage cumulation at the fatigue crack tip in austenitic stainless steel

International Symposium on Detection of Damage (ASTM) Dearborn, Michigan, 11 Mai 1982

 

34. K. SAANOUNI, C. BATHIAS

Cumul de l'endommagement à température élevée dans l'Udimet 500

Journées Métallurgiques d'Automne, Paris, Oct. 1982

 

35. C. BATHIAS

Rupture des Matériaux Composites

Journées sur la rupture des polymères du CEMP. Paris, Nov. 1982

 

36. A. CLERIVET, C. BATHIAS

Fissuration en fatigue corrosion des alliages d'aluminium,

Journées de Printemps de la S.F.M., Paris 17 Mai 1983

 

37. A. LAKSIMI, C. BATHIAS

Mécanique et mécanisme de croissance du délaminage en fatigue de composites verre-résine en mode d'ouverture et de cisaillement

Colloque international du CNRS, Grenoble. 20-24 Juin 1983

 

38. Z. MILOSEVIC, C. BATHIAS

Application of fracture mechanics to materials and structures

ECF Freiburg, RFA, Juin 1983

 

39. Z. MILOSEVIC, C. BATHIAS

Surface cracks in welds of 7020 T6 aluminium alloy

Intern. Conf. on fracture prevention in energy and transport systems.

Rio de Janeiro, nov. 1983

 

40. M. VANCON, J. ODORICO, C. BATHIAS

Etude fractographique du délaminage des composites fibres de carbone-epoxy

JNC 4, 11-13 Sept. 1984, pp. 93-119, Pluralis, Paris

 

41. B. LAWLESS, S.D. ANTOLOVICH, C. BATHIAS

The effect of microstructure on the FCP and overload behavior of Waspaloy at room temperature

113th AIME Meeting, Los Angeles, 27-29 Février 1984. pp. 285-301

 

42. Z. MILOSEVIC and C. BATHIAS

Bidimensional stable crack growth in thin plates of 7020 T6 aluminium alloy

5th ECF, Lisbonne, 17-21 Sept. 1984 PP. 951 à 960

 

43. C. BATHIAS

Evaluation of dommage in composite materials by X ray tomography

Gordon Conference, Santa Barbara, Janv. 1985

 

44. D. LEFEBVRE et C. BATHIAS

Delamination of composite materials. Fracture Mechanics and damage evaluation

ICCM 5, San Diego, 29-31 Juillet 1985, pp. 331-345

 

45. O. ONI et C. BATHIAS

Small part through fatigue crack growth from micronotched specimen of high strength steels

Int. Conf. on Short Crack, Sheffield, 4-8 Nov. 1985

 

46. L. BOUKSIM and C. BATHIAS

Initiation and propagation of short cracks in an aluminium alloy subjected to programmed block loading

Int. Conf. on Short Crack, Sheffield, 4-8 Nov. 1985

 

47. D. LEFEBVRE et C. BATHIAS

Fractography of delamination of carbon fiber composites

Symposium ASTM on Fractography of Modern Engineering Materials - Nashville 18-19 Nov. 1985

 

48. C. BATHIAS

Evolution récente des essais de rupture

Colloque sur les défauts tolérables et la mécanique de la rupture, Paris 15-16 Oct. 1985

 

49. C. BATHIAS, J.L. CHABOCHE, K. SAANOUNI

On the crack growth prediction in the viscoplastic strutures by a local approach

Conference on Materials and Energy, MITI, Tokyo, 6-10 May 1985

 

50. A. LAKSIMI. C. BATHiAS

Fracture mechanics of glass epoxy composites

EUROMECH 7, Varsovie, 12-15 Nov. 1985

 

51. J.P. BONNAFE, J.L. LEBRUN, G. MAEDER, C. BATHIAS

X Ray diffraction and acoustic emission study of fatigue damage in aluminium alloys

International Conference on Residual Stress, Garmish Partenkirchen, Oct. 1986

 

52. C. BATHIAS, J.P. BONNAFE

Les effets bénéfiques du grenaillage

Ecole d'Eté Franco-Canadienne, McGiII, Montréal, Juillet 1986

 

53. C. BATHIAS

Compression testing of composite materials

Gordon Conference, Santa Barbara, Janv. 1987

 

54. Y. LAMBERT, C. BATHIAS, M. BARKI et A. PELISSIER-TANON

The application of J. Concept to fatigue crack growth in large scale yelding

19th ASTM Symposium on Fracture Mechanics - San Antonio - 30 Juin-2 Juillet 1986

 

55. A. CLERIVET, C. BATHIAS

Influence of various parameters on the crack closure effect in fatigue crack propagation in al alloys

Int. Symposium on Fatigue crack closure, Charleston, Mai 1986

 

56. C. BATHIAS

Crack closure effect in fatigue propagation of elliptical cracks under variable amplitude loading

ECF 6, Amsterdam Juin 1986

 

57. C. CAMPELLO, C. BATHIAS, K. KAMIMURA, K. ANDOH, M. AFZALI, J. PEIGNEY, Y; OUSSET

Etude de l'endommagement de plaques stratifiées contenant un trou circulaire sous chargement quasi-statique

J.N.C. 5, Paris, Sept. 1986

 

58. G. INIZAN, L. ANQUEZ, C. BATHIAS

Etude de l'endommagement d'une plaque composite trouée sous sollicitations biaxiales monotones et cycliques

J.N.C. 5, Paris, Sept. 1986

 

59. D. LAI, C. BATHIAS

Comportement à l'endommagement en compression autour d'un trou d'un matériau composite carbone-epoxy

J.N.C. 5, Paris, Sept. 1986

 

60. A. LAKSIMI, M. CHERFAOUI. C. BATHIAS

Study of initiation and propagation by acoustic emission in glass-epoxy composite

J.N.C. 5, Paris, Sept. 1986

 

61. K. KAMIMURA, K. ANDO, C. BATHIAS

Prediction of nonlinear stress-strain behavior based on damage flow rule for composite laminates

ICCM 6, London, 20-24 July 1987

 

62.C. LESPINASSE, C. BATHIAS

Fatigue crack growth of the 8090 alloy under spectrum loading

Third Int. Conference on AI-Li alloy. May 1987, Paris C 3, P. 793-799

 

63. C. BATHIAS

Endommagement des matériaux composites

Conférence invitée au 6ème colloque "Mécanique et Matériaux", Tarbes. 18-20 Nov. 1987

 

64. C. BATHIAS

Fracture assessment of composite structure

Conférence invitée à ASFM6. 28 Sept.- 2 Oct. 1987. Ispra MEP 1989, 429-455

 

65. A. CAGNASSO, H.J. LATIERE et C. BATHLAS

Application de la tomographie à l'étude de l'endommagement des matériaux composites à haute performance

6ème colloque international sur les méthodes de CND - Toulouse, 1987

 

66. J.P. BONNAFE, G. MAEDER, C. BATHIAS

Etude par diffraction X et émission acoustique de l'endommagement par fatigue des alliages d'aluminium à haute résistance

10ème Conférence sur le grenaillage de précontrainte, 17-18 Sept. 1987, Senlis, P. 93-1 10

 

67. C. BATHIAS et B. MARX

Use of Materials data in France

Int. Symposium on computerization and networking of materials property data bases - Philadelphie, 24 Déc. 1987, STP 1017 p 92-98

 

68. C. BATHIAS

Application of X Ray tomography at the delamination of composite materials

Short presentation Gordon Conference, Ventura, January 11-15, 1988

 

69. C. BATHIAS

The fatigue of high performance composite materials

NATO/ASI, Alvor, Portugal, 5-15 April 1988, Conférence invitée

 

70. C. BATHIAS

The fatigue of high performance composite materials

Conférence prononcée successivement au :

NRIM à Tokyo 21/7/1988

Tokyo University 22/7/1988

IPRI à Tsukuba 25/7/1988

Nihon University à Tokyo 26/7/1988

Tohoku University à Sendaï 29/7/1988

Kyoto Institute For Technology 2/8/1988

Georgia Tech à Atlanta 31/8/1988

 

71. C. GOUNET et C. BATHIAS

Influence of an atmospheric environment on the fatigue crack growth behaviour of the 8090 aluminium lithium alloy

ICF7, Houston, 20-24 march 89, p 2519-2526

 

72. D. LAI et C. BATHIAS

Endommagement en compression et traction autour d'un trou dans un matériau composite carbone-epoxy.

ECCM 3. Bordeaux, 23 mars 1989

 

73. C. BATHIAS

Polymer Composite Fracture

ASM Materials Congress 2-5 Oct. 89 Conférence invitée, Indianapolis

 

74. C. BATHIAS, D. LAI

Hole effect and compression fatigue of T300/5208 composite materials

ASTM symposium on composite materials: fatigue and fracture. Orlando nov.6-7, 1989

 

75. C. BATHIAS

Les effets adverses des vibrations dans les aubes de turbines

Journées Science et Défense. Paris. Fév. 1990

 

76. C. BATHIAS, R. KHOSHRAVAN

Evaluation and modeling of delamination under static and cyclic loading

French-Japanese seminar on advanced materials I. March 13-14, Paris, 1990

 

77. T.P. SOEMARDI, D. LAI, C. BATHIAS

Conférence invitée - "Static and fatigue biaxial testing of fiber composites using thin wailed tubular specimens"

IUATAM-Troyes, May 29-June 1, 1990

 

78. C. BATHIAS

Fracture and fatigue of high performance composite materials

ICAMP 90 - Utsunomya. Japon, July 1990 - Conférence invitée

 

79. C. BATHIAS

A review of composite materials fracture

French-japanese seminar on advanced materials. Tsukuba, Japan, Oct. 1990

 

80. C. BATHIAS, A. CAGNASSO

Application of Xray tomography to non destructive testing of high performance polymer composites

ASTM symposium on Damage detection quality assurance in composite materials, San Antonio Nov. 13-14, 1990

 

81. J. XIAO, D. LAI, C. BATHIAS

Notched strength and damage mechanism of laminated composites with circular, holes

Euromech 269, St Etienne, Déc. 1990 - Conférence invitée

 

82. C. BATHIAS

Static and fatigue biaxal testing of fiber composites using thin wailed tubular specimen

International symposium on fatigue damage measurement and evaluation under complex loadings, Fukuoka - Japan. July 25, 1991 - Conférence invitée, p161/169

 

83. C. BATHIAS. J. NI, T. WU, D. LAI

Fatigue threshold of alloys at high frequency

Sixth Int. Conf. on Mechanical behavior of materials Kyoto, July 29, 1991 - August 2, 1991 - p463/468

 

84. C. BATHIAS

Discussion leader - European Research Conference on grain boundary and interface

Prague, Sept 14-19. 1991

 

85. X. LIU and C. BATHIAS

Fatigue damage development in Al203/Al composites

Fatigue and fracture of inorganic composites, Cambridge (UK). April 1st, 1992

 

86. J. NI and C. BATHIAS

Prevision of fatigue limit between 105 and 109 cycles using ultrasonic device

Symposium on advances in fatigue lifetime predictive techniques - ASTM - Pittsburgh. May 4-5. 1992

 

87. C. BATHIAS, T. WU; J. NI

Automatic in ultrasonic fatigue machine to study low crack growth at room and high temperature

5ème journée internationale de Printemps de la SF2M - Paris. Juin 15-17. 1992

 

88. C. BATHIAS, CH. LU and JM. SIMON

Fatigue of elastomers

International Rubber Conference - Beijing, 13-15 October 1992 - pp 243-246.

 

89. C. BATHIAS and T. WU

Simulation de la fatigue vibratoire des disques de turbine à 20kHz et 650°

Journées de Printemps de la SF2M, Mai 1993, Paris

 

90. XC. LIU and C. BATHIAS

Enhancing Interface Bonding in Al203/AI Alloy composites for improving their high temperature mechanical properties

Proceedings of Japan-Europe Symposium on Composite Materials, International Symposium on Advanced Materials, 1 -2 June 1993, Nagoya, Japan, pp 280-285

 

91. J. XIAO and C. BATHIAS

Fatigue damage mechanisms and fatigue strengh for woven laminates

Proceedings of the 3th European Conference on Advanced Materiais ands Processes, 8-10 June 1993

 

92. J. XIAO and C. BATHIAS

Damage in quasi-isotropic carbon/epoxy composite laminates with circular holes under monotonic uniaxial loading

Proceedings of the ICCM/9, Composites Behaviour, vol5, pp 23-30, 12-16 July 1993,Madrid

 

93. J. XIAO and C. BATHIAS

Fatigue damage mechanisms of woven laminates

Proceedings of the ICCM/9, Composites Design, vol4, pp 548-555, 12-16 July 1993, Madrid

 

94. XC. LIU and C. BATHIAS

Mechanical properties of Al203/AI composites

Proceedings of Ninth International Conference on Composite Materials (ICCM 9), 12-16 July 1993, Madrid, Spain - Vol 1, Metal Matrix Composites - Ed Antonio Miravete, Pub University of Zaragosa, Woodhead Publishing limited, pp 141-148

 

95. XC. LIU and C. BATHIAS

Creep damage in Al203/AI Composites

Proceedings of Sixth European Conference on Composites Materials (ECCM-6), 20-24 September 1993, Bordeaux, France

 

96. C. BATHIAS

Conférence invitée – "Defect Characterization"

National Science Foundation Workshop - Washington State University, 10-13 October 1993

 

97. C. BATHIAS

Conférence invitée - "L'âge des matériaux Composites"

111ème Congrès de l'AFAS, 4-6 November 1993, Paris

 

98. C. BATHIAS

Application of fracture Mechanisms at Elastomeric Materials in Monotonic and Cyclic Loading

ICAMP 93, Tokyo 7-8 December 1993 - Conférence invitée

 

99. T WU, C BATHIAS, JP GUEDOU and F. SONIAK

Fatigue Thresold of Nickel Base Alloys at High Frequency and High Temperature

International Symposium Fatigue 1993. Montréal.

 

100. C. BATHIAS

1) Application of X-Ray scanner to Study Composite Materiais at a Mesoscopic Scale.

2) Fracture Mechanics Concepts for Elastomeric Materials

Conférences Invitées prononcées en Chine:

- 12 April 1994: University of Aeronautics - Pékin

- 15 April 1994: Institut of Technology - Chanqsha

- 19-20 April 1994: University of Transport - Chengdu

 

101. C. BATHIAS, A. BOUZA

Conférence Invitée - "Etude à l'Echelle Mésoscopique des Matériaux Composites à Matrice Aluminium"

ETS , Montréal, 1 November 1994

 

102. C. BATHIAS, T. WU and F. POTTER

Conférence Invitée - "Defect Characterization in Composite Materials Using X-Ray Computer Assisted Tomography"

ASME Meeting Chicago, 11 November 1994-Vol 43, pp 37-64

 

103. C. BATHIAS, D. WU and F. POTTER

Micro-Computer Aided Tomography of Composite Materials

ASNT 1994 FaII, Conference and Quality Testing Show - Atlanta, Septembre 19-23, 1994

 

104. C. BATHIAS

Conférence invitée - "A review of delamination testing in monotonic and cyclic loading"

Petten. Hollande. Joint Research Center- 23 février 1995.

 

105. C.BATHIAS, A. BOUZA and J. MASOUNAVE

Application of the computed tomography to the quantitative reinforcement study of a metal matrix composite

ENERCOMP 1995 - Montréal. 8-10 Mai 1995

 

106. G. JAGO, J. BECHET and C. BATHIAS

Quantitative Study of the Crack Deflection in Ti-6.2.4.6. Alloy

MC 95, International Metallography Conference, Colmar, 10-12 May 1995

 

107. A. BOUZA and C. BATHIAS

Application de la Tomographie à la Prévision de l'Endommagement des Composites à Matrice Métallique à partir des Renforts Particulaires

Paris - Journées Scientifiques et Techniques AMAC MECAMAT, 30-31 mai 1995

 

108. C. BATHIAS

Conférence plénière – "Technics of Detection Using X Ray Tomography, in Composite Materials"

Beiiinq, ICFAP 95 - 23-26 june 1995

 

109. C.BATHIAS

Conférence Invitée - "Plastic Zone at a Fatigue Crack Tip"

Boston, Symposium on Fracture, MIT - 26 june 1995

 

110. C. BATHIAS, K. LE GORJU. C. LU and L. MENABEUF

Modeling Fatigue Damage in Elastomeric Materials

27th Nat. Symposium on Fatigue and Fracture Mechanics - Williamsburg, VA (USA)-June 26-29. 1995.

 

111. C. BATHIAS, T. WU and A. BOUZA

Key Note Lecture - "Mesoscopic Scale Characterization of Composite Materials with X Ray Tomography"

Corfou, COMP 95, 18-24 september 1995 - pp 164-182

 

112. C.BATHIAS

Conférence Invitée - "La Fatigue des Matériaux Composites à Matrice Aluminium"

Ecole des Mines de Paris. Conférence franco-canadienne - 27 september 1995

 

113. G. JAGO, J. BECHET and C. BATHIAS

Microstructures / Properties Relationships in Ti-6.2.4.6. Alloy : a microstructural approach of the Fatigue Damage

Birmingham, Eight World Conference on Titanium, 22-26 Oct. 1995

 

114. C.BATHIAS

Conférence invitée au Japon - "High Frequency of Fatigue at Cryogenic Temperature"

Tsukuba. NRIM - 28 November 1995

 

115. C.BATHIAS

Conférence invitée au Japon - "Application of X Ray Tomography at a Mesoscopic Scale"

University of Kyoto - 1 december 1995

 

116. H. TAO and C. BATHIAS

Etude Expérimentale du Fretting-Fatigue à Très Haute Fréquence

Paris - Déc. 1995 - SF2M & CNRS

 

117. C. BATHIAS

Conférence invitée en Israël - "Hole Effect in Composite Materials"

University of Tel Aviv - 18 december 1995

 

118. C.BATHIAS

Conférence invitée en Israël - "Fatigue Prediction for Aircraft Components"

Tel Aviv, IAI - 19 december 1995

 

119. C.BATHIAS

Conférence invitée en Israël - "Fatigue of Metal Matrix Composites"

Haifa, TECHNION - 21 december 1995

 

120. G. JAGO, T. WU, D. GUICHARD and C. BATHIAS

A Cryogenic Fatigue Machine Working at 20 kHz and 77K

Berlin-Fatigue'96, 6-10 May 1996

 

121. J. BONIS, K. EL ALAMI and C.BATHIAS

Damage Cumulation of Ultrasonic Fatigue and Low Cycle Fatigue

Berlin-Fatigue'96, 6-10 May 1996

 

122. J. BONIS, F. SONIAK and C. BATHIAS

Ceramic Inclusion Effects on Ultrasonic Fatigue at High Temp. on a Powder Nickel Based alloy N18

Poitiers ECF 11, 3-6 septembre 1996

 

123. J. BONIS, T. WU and C. BATHIAS

Modelisation of Ultrasonic Fatigue Crack Growth in Nickel base alloy Turbine Disk

Fukuoka.Japan. Localised Damage’96 - 3-4 juin 1996

 

124. G. DOMINGUEZ, S. MASOUNAVE, C. BATHIAS and J. MASOUNAVE

Effect of Porosities on X-Rays Computed Tomography of CMMP

Cancun, Mexico, International Materials Research Congress - 1996

 

125. C. BATHIAS

A review of Fatigue of Aluminium Matrix Reinforced by Particles or short Fibers

Materials Science Forum - Proceeding ICAA 5 - Grenoble 1996 - pp. 1407 - 1412

 

126. C. BATHIAS

Conférence invitée - "Risque de fissuration par fatigue au-delà de 107 cycles entre 20K et 1000K"

INSTRUC - Paris - 28 nov. 1996

 

127. C. BATHIAS

Fatigue des élastomères sous chargement cyclique

IRAP - Le Mans - 28 nov. 1996

 

128. C. BATHIAS

Conférence invitée - "Smart materials for aeronautical structures"

ICSM - Tokyo - 19 mars 1997

 

129. C. BATHIAS & J. BONIS

Does a fatigue limit exist beyond 107 cycles in aeronautic alloys?

Journée Aéronautiques du Bourget - 18 juin 1997

 

130. C. BATHIAS & K. LE GORJU

Damage characterization of elastomeric composites using X - ray attenuation

DURACOSYS 97 - Blacksburg (USA) - sept. 1997

 

131. C. BATHIAS

Is there an infinite fatigue life in metals and alloys?

EUROMECH 382 - Paris - Juin 1998

 

132. P. FAGUNDES & C. BATHIAS

Modélisation des propriétés des bi-matériaux

Ecole d'Eté Franco-Québécoise - Montréal -juin 1998

 

133. C. BATHIAS & J. BONIS

Effect on inclusions on gigacycle fatigue of a nickel base alloy

ECF 12 - Sheffield (GB) - sept. 1998

 

134. M. GONZALEZ, G. DOMINGUEZ & C. BATHIAS

Study of particles distribution in composite materials using X ray computer tomography

ICEM 14 - Cancun (Mexique) - Août 1998

 

135. C. BATHIAS & J. BONIS

Gigacycle fatigue of nickel base alloys

SES 98 - Pullman (USA) - Oct. 1998

 

136. C. BATHIAS

Conférence invitée - Relation between Delta-K theshold and fatigue limit

ASTM Meeting - Nortfolk (USA) - Nov. 1998

 

137. M. GONZALEZ, G. FERRIERE & C. BATHIAS

Application de la tomographie X pour la caractérisation des matériaux composites à matrice métallique

JNC 10 - Arcachon – Nov. 1998

 

138. M. GONZALEZ, C. BATHIAS and G. DOMINGUEZ

Study of particles distribution in composite materials using X ray computer tomography

Vol-7 N°2-Décembre 1998 pp 12-18

 

139. M. GONZALEZ, G. DOMINGUEZ, C. BATHIAS

Some resultts from X Ray computed tomography applied to MMC

Journal of Composites Technology and Research, janv. 2000, pp 45-48

 

140. C. BATHIAS

There is no infinite fatigue life in metallic materials

FFEMS 22 - 1999 - pp 559-565

 

141. Q. WANG, J.Y. BERARD, A. DUBARRE, G. BAUDRY, C. BATHIAS

Gigacycle fatigue of ferrous alloys

FFEMS 22 - 1999 - pp 667-672

 

142. Q. WANG, J.Y BERARD, C. BATHIAS

High cycle fatigue crack initiation and propagation behaviour of HS spring steels

FFEMS 22 - 1999 - pp 673-677

 

143. Q. WANG, Z. SUN, C. BATHIAS

Fatigue crack initiation and growth of thin sheet at high frequency

Fatigue 1999 - Beijing - pp 169-174

 

144. Z. SUN, Q. WANG, C. BATHIAS

Experimental Investigation on Fretting Fatigue of high strength steel at high frequency"

Fatigue 1999 - Beijing - pp 1365-1370

 

145. C. BATHIAS, J. BECHET

Effect of microstructure on the fatigue strength of titanium alloys in the gigacycle regime

IUMR55 - Beijing - June 13, 1999 (invited conference)

 

146. C. BATHIAS

Effect of crystallization on fatigue of natural rubber (invited conference)

ASME meeting - June 29 - 1999 VPI - Blacksburg - USA

 

147. C. BATHIAS & G. BAUDRY

Calcul des Structures en Fatigue Gigacyclique

Instruc 4 – Paris, 23 Novembre 1999

 

148. C. BATHIAS, X. KONG

Gigacycle Fatigue – MTS Southwest Conference in China

Chengdu – 22 mars 2000 – Invited key Note Lecture

 

149. C. BATHIAS

Optimisation of materials selection and design for car industry in order to increase durability and weight saving

CODATU IX – Mexico 14 avril 2000

 

150. C. BATHIAS and K. LE GORJU

International Conference on Fatigue of Composites II

Plenary Lecture – Williamsburg – June 5 2000

 

151. C. BATHIAS

Application of X ray tomography to composites materials

Seoul University – Composite Materials for the New Millenium. August 23 2000. Invited Conference.

 

152. C. BATHIAS

Very high cycle Fatigue of Steels

ECF 13 – San Sebastian – 8 sept 2000 – Invited Key Note.

 

153. C. BATHIAS, L. DROUILLAC and P. LEFRANCOIS

Invited Key Note – "Fatigue Initiation Mechanisms From Mega to Gigacycle Fatigue"

International Conference of Fatigue Damage of Structural Materials III – Sept 19 2000 – Boston

 

154. C. BATHIAS, J. M. de MONICAULT and G. BAUDRY

Automated Piezoelectric Fatigue Machine for Severe Environments

ASTM STP 14N – Orlando – Nov 15 2000.

 

155. C. BATHIAS & K. LE GORJU

Application of X-ray Tomography for Understanding of Cavitation Process of Natural Rubbers

Le Mans – 8th International Seminar of Elastomers - 9 & 10 mai 2001.

 

156. C. BATHIAS

An Understanding of the Gigacycle Fatigue of Metals

Osaka - ISMS – 21 – 21 & 22 mai 2001- Invited Paper

 

157. C. BATHIAS, L. MANES, G. BAUDRY, S. RATHERY, JF VITTORI & JP DOUCET

Gigacylic Fatigue in Engineering Steels

Vienne – Juillet 2001

 

158. C. BATHIAS

Designing Components Against Gigacycle Fatigue

Vienne – Juillet 2001 - Keynote Lecture

 

159. C. BATHIAS & G. DOMINGUEZ

Invited Paper – "Fatigue Testing at Very High Number of Cycles"

Mexico – VII Congreso Annual de la Sociedad Mexicana de Ingeniera Mecanica – 19 Sept. 2001

 

160. C. BATHIAS

Optimization of  Materials Selection and Design for Car Industry in order to Increase Durability

Tokyo – EcoDesign 2001 – December 2001 – Invited Paper

 

161. C. BATHIAS

Mechanisms of Fatigue Crack Initiation at 109 cycles

2002 TMS Annual Meeting – Seattle – 18 February 2002 - Invited paper

 

162. C. BATHIAS

Facing the Progress of Composite Materials in the Maintenance of Aircraft

8th Japanese European Symposium on Composite Materials – Tokyo 16 april 2002 – Keynote Lecture

 

163. C. BATHIAS

A Survey of the progress of piezoelectric Fatigue Machines

Fatigue 2002 – Stockholm – 7 juin 2002 – Invited Paper

 

164. C. BATHIAS

Cavitation in elastomeric Materials

21st Annual Conference of the Tire Society – Akron – 10 september 2002 – Invited Paper

 

165. C. BATHIAS & G. DOMINGUEZ

Application of X-ray Tomography to light materials

3ème Congrès d’Elasto-Mécanique – Mexico – 29 novembre 2002

 

166. C. BATHIAS & J. BECHET

Effect of Microstructure on the Very High Cycle Fatigue of Alloys at Cryogenic Temperatures

TMS Annual Meeting – San Diego – 2 march 2003 – Invited Paper

 

167. C. BATHIAS

High Strength Steel S-N Curves, in the Gigacycle Regime

ICM 9 – Genève – 28 juin 2003

 

168. C. BATHIAS & J. BECHET

Gigacycle Fatigue Regime of a – b Titanium Alloys

Ti 2003 – Hamburg – 16 juillet 2003

 

169. C. BATHIAS

A review of Delamination test Methods

International Workshop on Delamination – Cachan – 15 septembre 2003

 

170. C. BATHIAS

Very High Cycle Fatigue SN Curves

7ème Congrès d’Electromécanique – Mexico – 3 novembre 2003

 

171. C. BATHIAS

A Survey of Composite Materials Delamination

9th European-Japanese Symposium on Composite Materials – Hamburg – May 26, 2004

 

172. C. BATHIAS

Effect of Complex Loading on the Fatigue Response of Rubbers

SEMX 2004 – Costa Mesa (Ca) – June 8, 2004

 

173. C. BATHIAS

Damage Detection using X ray Tomography

Seminar at Northwesten University – Nanjing – June 14, 2004

 

174. C. BATHIAS & S. DONG

Biaxial Fatigue of Elastomers

ICHMM 2004 – ChongQing – June 21, 2004 – Invited Lecture

 

175. C. BATHIAS

Mechanical Behavior of Rubbers

Franco Thaï Working Group Meeting on Rubbers – Bangkok – July 14, 2004

 

176. C. BATHIAS

An Engineering Point of View about Fatigue of Composite Materials

ICFC 3 – Kyoto – September 13, 2004 – Invited Lecture

 

177. E. BAYRAKTAR, R. CAPLAIN & C. BATHIAS

Multiscale Study of Fatigue Behaviour of Composite Materials by W Ray Tomography

ICFC 3 – Kyoto – September 14, 2004

 

178. I. MARINES, C. BATHIAS & Al

Carburized Steel S-N Curves in the Gigacyle Regime

VHCF 3 – Kyoto – September 16, 2004.

 

179. E. BAYRAKTAR, I. MARINES & C. BATHIAS

Failure Mechanisms of Automatic Metallic Alloy in VHCF Regime

Kyoto – September 16, 2004

 

180. G. BAUDRY, C. BATHIAS & Al

VHCF of a Wide Range of Alternative Engineering Materials Used in Automative Industry

VHCF 3 – Kyoto – September 17, 2004

 

181. H. XUE, H. TAO, C. BATHIAS

VHCF Behaviour of Two Phase Ti-Al Alloy

VHCF 3 – Kyoto – September 17, 2004

 

182. H. XUE, H. TAO, C. BATHIAS

The anaylsis of Specimen Design for Fatigue Test at Ultrasonic Frequency

VHCF 3 – Kyoto – September 17, 2004

 

183. C. BATHIAS

Piezo-electric Fatigue Testing Machines and Devices

VHCF 3 – Kyoto – September 17, 2004

 

184. S. DONG, C. BATHIAS, K. LE GORJU, F. HOURLIER, J.F VITTORI

Experimental Research on the Fatigue of Natural Research Rubber Subject to Multiaxial Loading

ICBMFF 7 Berlin – pp 323-328 – June 29, 2004

 

185. I. MARINES, X. BIN, G. DOMINGUEZ, J.F VITTORI , C. BATHIAS

Prevision de la Fatiga Gigacyclica de Aleaciones Metalicas, Mediante Metodos Estatisticos

8th Conference on Electro-Mechanical Engineering – Mexico City – November 2004

 

186. E. BAYRAKTAR, I. MARINES, X. BIN, G. DOMINGUEZ, J.F VITTORI, C. BATHIAS

Etude de la prévision de la fatigue gigacyclique des alliages métalliques par des méthodes statistiques

23è Conference of SF2M – Paris – May. 26, 2004

 

187. E. BAYRAKTAR, F. MONTEMBAULT, C. BATHIAS

Multiscale Observation of Polymer Materials in order to Explain Mecahnical Behaviour by X-Ray Tomography

IFAMS 2004 – Troyes – July 4-5, 2004

 

188. C. BATHIAS

Gigacycle Fatigue of Steels

Morelia – Mexico – April 7, 2005 – Seminar

 

189. E. BAYRAKTAR, I. MARINES, C. BATHIAS

Effet de Traitement de Surface sur la Tenue en Fatigue Gigacyclique d’Acier SAE 8620

SF2M/JPF 2005 – Senlis – May 10-11, 2005

 

190. E. BAYRAKTAR, S. ANTOLOVICH, C. BATHIAS

Deformation Behaviour and Damage Mechanisms of Wooden Plastic Matrix Composites

Paper n°88, session 049, SEM 2005, Experimental Mechanics – Portland – June 2005

 

191. E. BAYRAKTAR, K. BESSRI, C. BATHIAS

Damage Mechanism in Elastomeric Matrix Composites

Paper n°353, session 057, SEM 2005, Experimental Mechanics – Portland – June 2005

 

192. E. BAYRAKTAR, J. MASOUNAVE, C. BATHIAS

Damage Mechanism in Elastomeric Matrix Composites

Paper n°354, session 057, SEM 2005, Experimental Mechanics – Portland – June 2005